COMPOSITION
Neutral acids, corrosion inhibitors, detergent properties and additives with water.
USE
-
Warm up the engine, is to be warm but not hot.
-
Pour the preparation in the radiator tank (expansion) with the engine off.
-
Start the engine and keep it in operation for 10 minutes with an open heating system.
-
Turn off the engine.
-
Drain the old coolant.
-
Fill the cooling system water and run the engine for 2-3 minutes.
-
Turn off the engine, drain the water from the Fresh and pour coolant.
CAUTION
Hot cooling system is under pressure. Be careful when opening the radiator cap - can bring a pair of hot liquid or threatening burns.
DOSAGE
250 ml per liter of coolant 10-12.
Benifits
-
Quickly cleans cooling system
-
Removes scale, rust and dirt
-
Creates protective anticorrosive film on cooling system parts
-
Neutralizes formed acids, protects the system against corrosion
-
Improves efficiency of engine cooling
Dissolves sediments, dirt and rust accumulated in radiator
and cooling system. It is recommended to apply the product during each coolant
fluid change.
During operation, debris are deposited on the inner walls of the cooling system thereby reducing its efficiency.
Dissolves sediments, dirt and rust accumulated in radiator
and cooling system quickly (in 10 min).
It is recommended to apply the product during each coolant fluid change.
Product has been added to Cart. Now either you can checkout or continue buying new products.
